1#@!#!123s

Path : /var/softaculous/weberp/../october/../cszcms/../gedview/../wp62/../ossn/../drupal/
Filename : settings.php
<?php

/**
 * @file
 * Drupal site-specific configuration file.
 *
 * IMPORTANT NOTE:
 * This file may have been set to read-only by the Drupal installation program.
 * If you make changes to this file, be sure to protect it again after making
 * your modifications. Failure to remove write permissions to this file is a
 * security risk.
 *
 * The configuration file to be loaded is based upon the rules below. However
 * if the multisite aliasing file named sites/sites.php is present, it will be
 * loaded, and the aliases in the array $sites will override the default
 * directory rules below. See sites/example.sites.php for more information about
 * aliases.
 *
 * The configuration directory will be discovered by stripping the website's
 * hostname from left to right and pathname from right to left. The first
 * configuration file found will be used and any others will be ignored. If no
 * other configuration file is found then the default configuration file at
 * 'sites/default' will be used.
 *
 * For example, for a fictitious site installed at
 * http://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched
 * for in the following directories:
 *
 * - sites/8080.www.drupal.org.mysite.test
 * - sites/www.drupal.org.mysite.test
 * - sites/drupal.org.mysite.test
 * - sites/org.mysite.test
 *
 * - sites/8080.www.drupal.org.mysite
 * - sites/www.drupal.org.mysite
 * - sites/drupal.org.mysite
 * - sites/org.mysite
 *
 * - sites/8080.www.drupal.org
 * - sites/www.drupal.org
 * - sites/drupal.org
 * - sites/org
 *
 * - sites/default
 *
 * Note that if you are installing on a non-standard port number, prefix the
 * hostname with that number. For example,
 * http://www.drupal.org:8080/mysite/test/ could be loaded from
 * sites/8080.www.drupal.org.mysite.test/.
 *
 * @see example.sites.php
 * @see conf_path()
 */

/**
 * Database settings:
 *
 * The $databases array specifies the database connection or
 * connections that Drupal may use.  Drupal is able to connect
 * to multiple databases, including multiple types of databases,
 * during the same request.
 *
 * Each database connection is specified as an array of settings,
 * similar to the following:
 * @code
 * array(
 *   'driver' => 'mysql',
 *   'database' => 'databasename',
 *   'username' => 'username',
 *   'password' => 'password',
 *   'host' => 'localhost',
 *   'port' => 3306,
 *   'prefix' => 'myprefix_',
 *   'collation' => 'utf8_general_ci',
 * );
 * @endcode
 *
 * The "driver" property indicates what Drupal database driver the
 * connection should use.  This is usually the same as the name of the
 * database type, such as mysql or sqlite, but not always.  The other
 * properties will vary depending on the driver.  For SQLite, you must
 * specify a database file name in a directory that is writable by the
 * webserver.  For most other drivers, you must specify a
 * username, password, host, and database name.
 *
 * Transaction support is enabled by default for all drivers that support it,
 * including MySQL. To explicitly disable it, set the 'transactions' key to
 * FALSE.
 * Note that some configurations of MySQL, such as the MyISAM engine, don't
 * support it and will proceed silently even if enabled. If you experience
 * transaction related crashes with such configuration, set the 'transactions'
 * key to FALSE.
 *
 * For each database, you may optionally specify multiple "target" databases.
 * A target database allows Drupal to try to send certain queries to a
 * different database if it can but fall back to the default connection if not.
 * That is useful for master/slave replication, as Drupal may try to connect
 * to a slave server when appropriate and if one is not available will simply
 * fall back to the single master server.
 *
 * The general format for the $databases array is as follows:
 * @code
 * $databases['default']['default'] = $info_array;
 * $databases['default']['slave'][] = $info_array;
 * $databases['default']['slave'][] = $info_array;
 * $databases['extra']['default'] = $info_array;
 * @endcode
 *
 * In the above example, $info_array is an array of settings described above.
 * The first line sets a "default" database that has one master database
 * (the second level default).  The second and third lines create an array
 * of potential slave databases.  Drupal will select one at random for a given
 * request as needed.  The fourth line creates a new database with a name of
 * "extra".
 *
 * For a single database configuration, the following is sufficient:
 * @code
 * $databases['default']['default'] = array(
 *   'driver' => 'mysql',
 *   'database' => 'databasename',
 *   'username' => 'username',
 *   'password' => 'password',
 *   'host' => 'localhost',
 *   'prefix' => 'main_',
 *   'collation' => 'utf8_general_ci',
 * );
 * @endcode
 *
 * For handling full UTF-8 in MySQL, including multi-byte characters such as
 * emojis, Asian symbols, and mathematical symbols, you may set the collation
 * and charset to "utf8mb4" prior to running install.php:
 * @code
 * $databases['default']['default'] = array(
 *   'driver' => 'mysql',
 *   'database' => 'databasename',
 *   'username' => 'username',
 *   'password' => 'password',
 *   'host' => 'localhost',
 *   'charset' => 'utf8mb4',
 *   'collation' => 'utf8mb4_general_ci',
 * );
 * @endcode
 * When using this setting on an existing installation, ensure that all existing
 * tables have been converted to the utf8mb4 charset, for example by using the
 * utf8mb4_convert contributed project available at
 * https://www.drupal.org/project/utf8mb4_convert, so as to prevent mixing data
 * with different charsets.
 * Note this should only be used when all of the following conditions are met:
 * - In order to allow for large indexes, MySQL must be set up with the
 *   following my.cnf settings:
 *     [mysqld]
 *     innodb_large_prefix=true
 *     innodb_file_format=barracuda
 *     innodb_file_per_table=true
 *   These settings are available as of MySQL 5.5.14, and are defaults in
 *   MySQL 5.7.7 and up.
 * - The PHP MySQL driver must support the utf8mb4 charset (libmysqlclient
 *   5.5.3 and up, as well as mysqlnd 5.0.9 and up).
 * - The MySQL server must support the utf8mb4 charset (5.5.3 and up).
 *
 * You can optionally set prefixes for some or all database table names
 * by using the 'prefix' setting. If a prefix is specified, the table
 * name will be prepended with its value. Be sure to use valid database
 * characters only, usually alphanumeric and underscore. If no prefixes
 * are desired, leave it as an empty string ''.
 *
 * To have all database names prefixed, set 'prefix' as a string:
 * @code
 *   'prefix' => 'main_',
 * @endcode
 * To provide prefixes for specific tables, set 'prefix' as an array.
 * The array's keys are the table names and the values are the prefixes.
 * The 'default' element is mandatory and holds the prefix for any tables
 * not specified elsewhere in the array. Example:
 * @code
 *   'prefix' => array(
 *     'default'   => 'main_',
 *     'users'     => 'shared_',
 *     'sessions'  => 'shared_',
 *     'role'      => 'shared_',
 *     'authmap'   => 'shared_',
 *   ),
 * @endcode
 * You can also use a reference to a schema/database as a prefix. This may be
 * useful if your Drupal installation exists in a schema that is not the default
 * or you want to access several databases from the same code base at the same
 * time.
 * Example:
 * @code
 *   'prefix' => array(
 *     'default'   => 'main.',
 *     'users'     => 'shared.',
 *     'sessions'  => 'shared.',
 *     'role'      => 'shared.',
 *     'authmap'   => 'shared.',
 *   );
 * @endcode
 * NOTE: MySQL and SQLite's definition of a schema is a database.
 *
 * Advanced users can add or override initial commands to execute when
 * connecting to the database server, as well as PDO connection settings. For
 * example, to enable MySQL SELECT queries to exceed the max_join_size system
 * variable, and to reduce the database connection timeout to 5 seconds.
 *
 * NOTE: NO_AUTO_CREATE_USER was removed in MySQL 8.0.11.
 * Some hosting providers/MySQL packages may report the wrong MySQL version.
 * If this is the case, set 'sql_mode' manually:
 *
 * @code
 * $databases['default']['default'] = array(
 *   'init_commands' => array(
 *     'big_selects' => 'SET SQL_BIG_SELECTS=1',
 *     'sql_mode' => "SET sql_mode = 'REAL_AS_FLOAT,PIPES_AS_CONCAT,ANSI_QUOTES,IGNORE_SPACE,STRICT_TRANS_TABLES,STRICT_ALL_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO",
 *   ),
 *   'pdo' => array(
 *     PDO::ATTR_TIMEOUT => 5,
 *   ),
 * );
 * @endcode
 *
 * WARNING: These defaults are designed for database portability. Changing them
 * may cause unexpected behavior, including potential data loss.
 *
 * @see DatabaseConnection_mysql::__construct
 * @see DatabaseConnection_pgsql::__construct
 * @see DatabaseConnection_sqlite::__construct
 *
 * Database configuration format:
 * @code
 *   $databases['default']['default'] = array(
 *     'driver' => 'mysql',
 *     'database' => 'databasename',
 *     'username' => 'username',
 *     'password' => 'password',
 *     'host' => 'localhost',
 *     'prefix' => '',
 *   );
 *   $databases['default']['default'] = array(
 *     'driver' => 'pgsql',
 *     'database' => 'databasename',
 *     'username' => 'username',
 *     'password' => 'password',
 *     'host' => 'localhost',
 *     'prefix' => '',
 *   );
 *   $databases['default']['default'] = array(
 *     'driver' => 'sqlite',
 *     'database' => '/path/to/databasefilename',
 *   );
 * @endcode
 */
$databases = array (
  'default' => 
  array (
    'default' => 
    array (
      'database' => '[[softdb]]',
      'username' => '[[softdbuser]]',
      'password' => '[[softdbpass]]',
      'host' => '[[softdbhost]]',
      'port' => '',
      'driver' => 'mysql',
      'prefix' => '[[dbprefix]]',
    ),
  ),
);

/**
 * Quoting of identifiers in MySQL.
 *
 * To allow compatibility with newer versions of MySQL, Drupal will quote table
 * names and some other identifiers. The ANSI standard character for identifier
 * quoting is the double quote (") and that can be used by MySQL along with the
 * sql_mode setting of ANSI_QUOTES. However, MySQL's own default is to use
 * backticks (`). Drupal 7 uses backticks for compatibility. If you need to
 * change this, you can do so with this variable. It's possible to switch off
 * identifier quoting altogether by setting this variable to an empty string.
 *
 * @see https://www.drupal.org/project/drupal/issues/2978575
 * @see https://dev.mysql.com/doc/refman/8.0/en/identifiers.html
 * @see \DatabaseConnection_mysql::setPrefix
 * @see \DatabaseConnection_mysql::quoteIdentifier
 */
# $conf['mysql_identifier_quote_character'] = '"';

/**
 * Access control for update.php script.
 *
 * If you are updating your Drupal installation using the update.php script but
 * are not logged in using either an account with the "Administer software
 * updates" permission or the site maintenance account (the account that was
 * created during installation), you will need to modify the access check
 * statement below. Change the FALSE to a TRUE to disable the access check.
 * After finishing the upgrade, be sure to open this file again and change the
 * TRUE back to a FALSE!
 */
$update_free_access = FALSE;

/**
 * Salt for one-time login links and cancel links, form tokens, etc.
 *
 * This variable will be set to a random value by the installer. All one-time
 * login links will be invalidated if the value is changed. Note that if your
 * site is deployed on a cluster of web servers, you must ensure that this
 * variable has the same value on each server. If this variable is empty, a hash
 * of the serialized database credentials will be used as a fallback salt.
 *
 * For enhanced security, you may set this variable to a value using the
 * contents of a file outside your docroot that is never saved together
 * with any backups of your Drupal files and database.
 *
 * Example:
 *   $drupal_hash_salt = file_get_contents('/home/example/salt.txt');
 *
 */
$drupal_hash_salt = '[[hash_salt]]';

/**
 * Base URL (optional).
 *
 * If Drupal is generating incorrect URLs on your site, which could
 * be in HTML headers (links to CSS and JS files) or visible links on pages
 * (such as in menus), uncomment the Base URL statement below (remove the
 * leading hash sign) and fill in the absolute URL to your Drupal installation.
 *
 * You might also want to force users to use a given domain.
 * See the .htaccess file for more information.
 *
 * Examples:
 *   $base_url = 'http://www.example.com';
 *   $base_url = 'http://www.example.com:8888';
 *   $base_url = 'http://www.example.com/drupal';
 *   $base_url = 'https://www.example.com:8888/drupal';
 *
 * It is not allowed to have a trailing slash; Drupal will add it
 * for you.
 */
# $base_url = 'http://www.example.com';  // NO trailing slash!

/**
 * PHP settings:
 *
 * To see what PHP settings are possible, including whether they can be set at
 * runtime (by using ini_set()), read the PHP documentation:
 * http://www.php.net/manual/ini.list.php
 * See drupal_environment_initialize() in includes/bootstrap.inc for required
 * runtime settings and the .htaccess file for non-runtime settings. Settings
 * defined there should not be duplicated here so as to avoid conflict issues.
 */

/**
 * Some distributions of Linux (most notably Debian) ship their PHP
 * installations with garbage collection (gc) disabled. Since Drupal depends on
 * PHP's garbage collection for clearing sessions, ensure that garbage
 * collection occurs by using the most common settings.
 */
ini_set('session.gc_probability', 1);
ini_set('session.gc_divisor', 100);

/**
 * Set session lifetime (in seconds), i.e. the time from the user's last visit
 * to the active session may be deleted by the session garbage collector. When
 * a session is deleted, authenticated users are logged out, and the contents
 * of the user's $_SESSION variable is discarded.
 */
ini_set('session.gc_maxlifetime', 200000);

/**
 * Set session cookie lifetime (in seconds), i.e. the time from the session is
 * created to the cookie expires, i.e. when the browser is expected to discard
 * the cookie. The value 0 means "until the browser is closed".
 */
ini_set('session.cookie_lifetime', 2000000);

/**
 * If you encounter a situation where users post a large amount of text, and
 * the result is stripped out upon viewing but can still be edited, Drupal's
 * output filter may not have sufficient memory to process it.  If you
 * experience this issue, you may wish to uncomment the following two lines
 * and increase the limits of these variables.  For more information, see
 * http://php.net/manual/pcre.configuration.php.
 */
# ini_set('pcre.backtrack_limit', 200000);
# ini_set('pcre.recursion_limit', 200000);

/**
 * Drupal automatically generates a unique session cookie name for each site
 * based on its full domain name. If you have multiple domains pointing at the
 * same Drupal site, you can either redirect them all to a single domain (see
 * comment in .htaccess), or uncomment the line below and specify their shared
 * base domain. Doing so assures that users remain logged in as they cross
 * between your various domains. Make sure to always start the $cookie_domain
 * with a leading dot, as per RFC 2109.
 */
# $cookie_domain = '.example.com';

/**
 * Variable overrides:
 *
 * To override specific entries in the 'variable' table for this site,
 * set them here. You usually don't need to use this feature. This is
 * useful in a configuration file for a vhost or directory, rather than
 * the default settings.php. Any configuration setting from the 'variable'
 * table can be given a new value. Note that any values you provide in
 * these variable overrides will not be modifiable from the Drupal
 * administration interface.
 *
 * The following overrides are examples:
 * - site_name: Defines the site's name.
 * - theme_default: Defines the default theme for this site.
 * - anonymous: Defines the human-readable name of anonymous users.
 * Remove the leading hash signs to enable.
 */
# $conf['site_name'] = 'My Drupal site';
# $conf['theme_default'] = 'garland';
# $conf['anonymous'] = 'Visitor';

/**
 * A custom theme can be set for the offline page. This applies when the site
 * is explicitly set to maintenance mode through the administration page or when
 * the database is inactive due to an error. It can be set through the
 * 'maintenance_theme' key. The template file should also be copied into the
 * theme. It is located inside 'modules/system/maintenance-page.tpl.php'.
 * Note: This setting does not apply to installation and update pages.
 */
# $conf['maintenance_theme'] = 'bartik';

/**
 * Reverse Proxy Configuration:
 *
 * Reverse proxy servers are often used to enhance the performance
 * of heavily visited sites and may also provide other site caching,
 * security, or encryption benefits. In an environment where Drupal
 * is behind a reverse proxy, the real IP address of the client should
 * be determined such that the correct client IP address is available
 * to Drupal's logging, statistics, and access management systems. In
 * the most simple scenario, the proxy server will add an
 * X-Forwarded-For header to the request that contains the client IP
 * address. However, HTTP headers are vulnerable to spoofing, where a
 * malicious client could bypass restrictions by setting the
 * X-Forwarded-For header directly. Therefore, Drupal's proxy
 * configuration requires the IP addresses of all remote proxies to be
 * specified in $conf['reverse_proxy_addresses'] to work correctly.
 *
 * Enable this setting to get Drupal to determine the client IP from
 * the X-Forwarded-For header (or $conf['reverse_proxy_header'] if set).
 * If you are unsure about this setting, do not have a reverse proxy,
 * or Drupal operates in a shared hosting environment, this setting
 * should remain commented out.
 *
 * In order for this setting to be used you must specify every possible
 * reverse proxy IP address in $conf['reverse_proxy_addresses'].
 * If a complete list of reverse proxies is not available in your
 * environment (for example, if you use a CDN) you may set the
 * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
 * Be aware, however, that it is likely that this would allow IP
 * address spoofing unless more advanced precautions are taken.
 */
# $conf['reverse_proxy'] = TRUE;

/**
 * Specify every reverse proxy IP address in your environment.
 * This setting is required if $conf['reverse_proxy'] is TRUE.
 */
# $conf['reverse_proxy_addresses'] = array('a.b.c.d', ...);

/**
 * Set this value if your proxy server sends the client IP in a header
 * other than X-Forwarded-For.
 */
# $conf['reverse_proxy_header'] = 'HTTP_X_CLUSTER_CLIENT_IP';

/**
 * Page caching:
 *
 * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
 * views. This tells a HTTP proxy that it may return a page from its local
 * cache without contacting the web server, if the user sends the same Cookie
 * header as the user who originally requested the cached page. Without "Vary:
 * Cookie", authenticated users would also be served the anonymous page from
 * the cache. If the site has mostly anonymous users except a few known
 * editors/administrators, the Vary header can be omitted. This allows for
 * better caching in HTTP proxies (including reverse proxies), i.e. even if
 * clients send different cookies, they still get content served from the cache.
 * However, authenticated users should access the site directly (i.e. not use an
 * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
 * getting cached pages from the proxy.
 */
# $conf['omit_vary_cookie'] = TRUE;

/**
 * CSS/JS aggregated file gzip compression:
 *
 * By default, when CSS or JS aggregation and clean URLs are enabled Drupal will
 * store a gzip compressed (.gz) copy of the aggregated files. If this file is
 * available then rewrite rules in the default .htaccess file will serve these
 * files to browsers that accept gzip encoded content. This allows pages to load
 * faster for these users and has minimal impact on server load. If you are
 * using a webserver other than Apache httpd, or a caching reverse proxy that is
 * configured to cache and compress these files itself you may want to uncomment
 * one or both of the below lines, which will prevent gzip files being stored.
 */
# $conf['css_gzip_compression'] = FALSE;
# $conf['js_gzip_compression'] = FALSE;

/**
 * Block caching:
 *
 * Block caching may not be compatible with node access modules depending on
 * how the original block cache policy is defined by the module that provides
 * the block. By default, Drupal therefore disables block caching when one or
 * more modules implement hook_node_grants(). If you consider block caching to
 * be safe on your site and want to bypass this restriction, uncomment the line
 * below.
 */
# $conf['block_cache_bypass_node_grants'] = TRUE;

/**
 * Expiration of cache_form entries:
 *
 * Drupal's Form API stores details of forms in cache_form and these entries are
 * kept for at least 6 hours by default. Expired entries are cleared by cron.
 * Busy sites can encounter problems with the cache_form table becoming very
 * large. It's possible to mitigate this by setting a shorter expiration for
 * cached forms. In some cases it may be desirable to set a longer cache
 * expiration, for example to prolong cache_form entries for Ajax forms in
 * cached HTML.
 *
 * @see form_set_cache()
 * @see system_cron()
 * @see ajax_get_form()
 */
# $conf['form_cache_expiration'] = 21600;

/**
 * String overrides:
 *
 * To override specific strings on your site with or without enabling the Locale
 * module, add an entry to this list. This functionality allows you to change
 * a small number of your site's default English language interface strings.
 *
 * Remove the leading hash signs to enable.
 */
# $conf['locale_custom_strings_en'][''] = array(
#   'forum'      => 'Discussion board',
#   '@count min' => '@count minutes',
# );

/**
 *
 * IP blocking:
 *
 * To bypass database queries for denied IP addresses, use this setting.
 * Drupal queries the {blocked_ips} table by default on every page request
 * for both authenticated and anonymous users. This allows the system to
 * block IP addresses from within the administrative interface and before any
 * modules are loaded. However on high traffic websites you may want to avoid
 * this query, allowing you to bypass database access altogether for anonymous
 * users under certain caching configurations.
 *
 * If using this setting, you will need to add back any IP addresses which
 * you may have blocked via the administrative interface. Each element of this
 * array represents a blocked IP address. Uncommenting the array and leaving it
 * empty will have the effect of disabling IP blocking on your site.
 *
 * Remove the leading hash signs to enable.
 */
# $conf['blocked_ips'] = array(
#   'a.b.c.d',
# );

/**
 * Fast 404 pages:
 *
 * Drupal can generate fully themed 404 pages. However, some of these responses
 * are for images or other resource files that are not displayed to the user.
 * This can waste bandwidth, and also generate server load.
 *
 * The options below return a simple, fast 404 page for URLs matching a
 * specific pattern:
 * - 404_fast_paths_exclude: A regular expression to match paths to exclude,
 *   such as images generated by image styles, or dynamically-resized images.
 *   The default pattern provided below also excludes the private file system.
 *   If you need to add more paths, you can add '|path' to the expression.
 * - 404_fast_paths: A regular expression to match paths that should return a
 *   simple 404 page, rather than the fully themed 404 page. If you don't have
 *   any aliases ending in htm or html you can add '|s?html?' to the expression.
 * - 404_fast_html: The html to return for simple 404 pages.
 *
 * Add leading hash signs if you would like to disable this functionality.
 */
$conf['404_fast_paths_exclude'] = '/\/(?:styles)|(?:system\/files)\//';
$conf['404_fast_paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i';
$conf['404_fast_html'] = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML+RDFa 1.0//EN" "http://www.w3.org/MarkUp/DTD/xhtml-rdfa-1.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>';

/**
 * By default the page request process will return a fast 404 page for missing
 * files if they match the regular expression set in '404_fast_paths' and not
 * '404_fast_paths_exclude' above. 404 errors will simultaneously be logged in
 * the Drupal system log.
 *
 * You can choose to return a fast 404 page earlier for missing pages (as soon
 * as settings.php is loaded) by uncommenting the line below. This speeds up
 * server response time when loading 404 error pages and prevents the 404 error
 * from being logged in the Drupal system log. In order to prevent valid pages
 * such as image styles and other generated content that may match the
 * '404_fast_paths' regular expression from returning 404 errors, it is
 * necessary to add them to the '404_fast_paths_exclude' regular expression
 * above. Make sure that you understand the effects of this feature before
 * uncommenting the line below.
 */
# drupal_fast_404();

/**
 * External access proxy settings:
 *
 * If your site must access the Internet via a web proxy then you can enter
 * the proxy settings here. Currently only basic authentication is supported
 * by using the username and password variables. The proxy_user_agent variable
 * can be set to NULL for proxies that require no User-Agent header or to a
 * non-empty string for proxies that limit requests to a specific agent. The
 * proxy_exceptions variable is an array of host names to be accessed directly,
 * not via proxy.
 */
# $conf['proxy_server'] = '';
# $conf['proxy_port'] = 8080;
# $conf['proxy_username'] = '';
# $conf['proxy_password'] = '';
# $conf['proxy_user_agent'] = '';
# $conf['proxy_exceptions'] = array('127.0.0.1', 'localhost');

/**
 * Authorized file system operations:
 *
 * The Update manager module included with Drupal provides a mechanism for
 * site administrators to securely install missing updates for the site
 * directly through the web user interface. On securely-configured servers,
 * the Update manager will require the administrator to provide SSH or FTP
 * credentials before allowing the installation to proceed; this allows the
 * site to update the new files as the user who owns all the Drupal files,
 * instead of as the user the webserver is running as. On servers where the
 * webserver user is itself the owner of the Drupal files, the administrator
 * will not be prompted for SSH or FTP credentials (note that these server
 * setups are common on shared hosting, but are inherently insecure).
 *
 * Some sites might wish to disable the above functionality, and only update
 * the code directly via SSH or FTP themselves. This setting completely
 * disables all functionality related to these authorized file operations.
 *
 * @see http://drupal.org/node/244924
 *
 * Remove the leading hash signs to disable.
 */
# $conf['allow_authorize_operations'] = FALSE;

/**
 * Theme debugging:
 *
 * When debugging is enabled:
 * - The markup of each template is surrounded by HTML comments that contain
 *   theming information, such as template file name suggestions.
 * - Note that this debugging markup will cause automated tests that directly
 *   check rendered HTML to fail.
 *
 * For more information about debugging theme templates, see
 * https://www.drupal.org/node/223440#theme-debug.
 *
 * Not recommended in production environments.
 *
 * Remove the leading hash sign to enable.
 */
# $conf['theme_debug'] = TRUE;

/**
 * CSS identifier double underscores allowance:
 *
 * To allow CSS identifiers to contain double underscores (.example__selector)
 * for Drupal's BEM-style naming standards, uncomment the line below.
 * Note that if you change this value in existing sites, existing page styles
 * may be broken.
 *
 * @see drupal_clean_css_identifier()
 */
# $conf['allow_css_double_underscores'] = TRUE;

/**
 * The default list of directories that will be ignored by Drupal's file API.
 *
 * By default ignore node_modules and bower_components folders to avoid issues
 * with common frontend tools and recursive scanning of directories looking for
 * extensions.
 *
 * @see file_scan_directory()
 */
$conf['file_scan_ignore_directories'] = array(
  'node_modules',
  'bower_components',
);

/**
 * Logging of user flood control events.
 *
 * Drupal's user module will place a temporary block on a given IP address or
 * user account if there are excessive failed login attempts. By default these
 * flood control events will be logged. This can be useful for identifying
 * brute force login attacks. Set this variable to FALSE to disable logging, for
 * example if you are using the dblog module and want to avoid database writes.
 *
 * @see user_login_final_validate()
 * @see user_user_flood_control()
 */
# $conf['log_user_flood_control'] = FALSE;

/**
 * Opt out of variable_initialize() locking optimization.
 *
 * After lengthy discussion in https://www.drupal.org/node/973436 a change was
 * made in variable_initialize() in order to avoid excessive waiting under
 * certain conditions. Set this variable to TRUE in order to opt out of this
 * optimization and revert to the original behaviour.
 */
# $conf['variable_initialize_wait_for_lock'] = FALSE;

/**
 * Opt in to field_sql_storage_field_storage_write() optimization.
 *
 * To reduce unnecessary writes field_sql_storage_field_storage_write() can skip
 * fields where values have apparently not changed. To opt in to this
 * optimization, set this variable to TRUE.
 */
$conf['field_sql_storage_skip_writing_unchanged_fields'] = TRUE;

/**
 * Use site name as display-name in outgoing mail.
 *
 * Drupal can use the site name (i.e. the value of the site_name variable) as
 * the display-name when sending e-mail. For example this would mean the sender
 * might be "Acme Website" <acme@example.com> as opposed to just the e-mail
 * address alone. In order to avoid disruption this is not enabled by default
 * for existing sites. The feature can be enabled by setting this variable to
 * TRUE.
 *
 * @see https://tools.ietf.org/html/rfc2822
 * @see drupal_mail()
 */
$conf['mail_display_name_site_name'] = TRUE;

/**
 * SameSite cookie attribute.
 *
 * This variable can be used to set a value for the SameSite cookie attribute.
 *
 * Versions of PHP before 7.3 have no native support for the SameSite attribute
 * so it is emulated.
 *
 * The session.cookie-samesite setting in PHP 7.3 and later will be overridden
 * by this variable for Drupal session cookies, and any other cookies managed
 * with drupal_setcookie().
 *
 * Setting this variable to FALSE disables the SameSite attribute on cookies.
 *
 * @see drupal_setcookie()
 * @see drupal_session_start()
 * @see https://www.php.net/manual/en/session.configuration.php#ini.session.cookie-samesite
 */
# $conf['samesite_cookie_value'] = 'None';

/**
 * Retain legacy has_js cookie.
 *
 * Older releases of Drupal set a has_js cookie with a boolean value which
 * server-side code can use to determine whether JavaScript is available.
 *
 * This functionality can be re-enabled by setting this variable to TRUE.
 */
# $conf['set_has_js_cookie'] = FALSE;

/**
 * Skip file system permissions hardening.
 *
 * The system module will periodically check the permissions of your site's
 * site directory to ensure that it is not writable by the website user. For
 * sites that are managed with a version control system, this can cause problems
 * when files in that directory such as settings.php are updated, because the
 * user pulling in the changes won't have permissions to modify files in the
 * directory.
 */
# $conf['skip_permissions_hardening'] = TRUE;

/**
 * Additional public file schemes:
 *
 * Public schemes are URI schemes that allow download access to all users for
 * all files within that scheme.
 *
 * The "public" scheme is always public, and the "private" scheme is always
 * private, but other schemes, such as "https", "s3", "example", or others,
 * can be either public or private depending on the site. By default, they're
 * private, and access to individual files is controlled via
 * hook_file_download().
 *
 * Typically, if a scheme should be public, a module makes it public by
 * implementing hook_file_download(), and granting access to all users for all
 * files. This could be either the same module that provides the stream wrapper
 * for the scheme, or a different module that decides to make the scheme
 * public. However, in cases where a site needs to make a scheme public, but
 * is unable to add code in a module to do so, the scheme may be added to this
 * variable, the result of which is that system_file_download() grants public
 * access to all files within that scheme.
 */
# $conf['file_additional_public_schemes'] = array('example');

/**
 * Sensitive request headers in drupal_http_request() when following a redirect.
 *
 * By default drupal_http_request() will strip sensitive request headers when
 * following a redirect if the redirect location has a different http host to
 * the original request, or if the scheme downgrades from https to http.
 *
 * These variables allow opting out of this behaviour. Careful consideration of
 * the security implications of opting out is recommended.
 *
 * @see _drupal_should_strip_sensitive_headers_on_http_redirect()
 * @see drupal_http_request()
 */
# $conf['drupal_http_request_strip_sensitive_headers_on_host_change'] = TRUE;
# $conf['drupal_http_request_strip_sensitive_headers_on_https_downgrade'] = TRUE;

/**
 * Cron lock expiration timeout:
 *
 * Each time Drupal's cron is executed, it acquires a cron lock. Older releases
 * of Drupal set the default cron lock expiration timeout to 240 seconds. This
 * duration was considered short, because it often caused concurrent cron runs
 * especially on busy sites heavily utilizing cron.
 *
 * Use this variable to set a custom cron lock expiration timeout (float).
 */
# $conf['cron_lock_expiration_timeout'] = 900.0;

/**
 * File schemes whose paths should not be normalized:
 *
 * Normally, Drupal normalizes '/./' and '/../' segments in file URIs in order
 * to prevent unintended file access. For example, 'private://css/../image.png'
 * is normalized to 'private://image.png' before checking access to the file.
 *
 * On Windows, Drupal also replaces '\' with '/' in URIs for the local
 * filesystem.
 *
 * If file URIs with one or more scheme should not be normalized like this, then
 * list the schemes here. For example, if 'porcelain://china/./plate.png' should
 * not be normalized to 'porcelain://china/plate.png', then add 'porcelain' to
 * this array. In this case, make sure that the module providing the 'porcelain'
 * scheme does not allow unintended file access when using '/../' to move up the
 * directory tree.
 */
# $conf['file_sa_core_2023_005_schemes'] = array('porcelain');

/**
 * Configuration for phpinfo() admin status report.
 *
 * Drupal's admin UI includes a report at admin/reports/status/php which shows
 * the output of phpinfo(). The full output can contain sensitive information
 * so by default Drupal removes some sections.
 *
 * This behaviour can be configured by setting this variable to a different
 * value corresponding to the flags parameter of phpinfo().
 *
 * If you need to expose more information in the report - for example to debug a
 * problem - consider doing so temporarily.
 *
 * @see https://www.php.net/manual/function.phpinfo.php
 */
# $conf['sa_core_2023_004_phpinfo_flags'] = ~(INFO_VARIABLES | INFO_ENVIRONMENT);

/**
 * Session IDs are hashed by default before being stored in the database. This
 * reduces the risk of sessions being hijacked if the database is compromised.
 *
 * This variable allows opting out of this security improvement.
 */
# $conf['do_not_hash_session_ids'] = TRUE;

/**
 * URL for update information.
 *
 * Drupal's update module can check for the availability of updates. By default
 * https is used for this check. If for any reason your site cannot use https
 * you can change this variable to fallback to http. It is recommended to fix
 * the problem with SSL/TLS rather than use http which provides no security.
 */
# $conf['update_fetch_url'] = 'https://updates.drupal.org/release-history';

/**
 * Opt out of double submit protection.
 *
 * By default Drupal will prevent consecutive form submissions of identical form
 * values. Set this variable to FALSE in order to opt out of this
 * prevention and revert to the original behaviour.
 */
# $conf['javascript_use_double_submit_protection'] = FALSE;

/**
 * Cron logging.
 *
 * Optionally drupal_cron_run() can log each execution of hook_cron() together
 * with the execution time. This is disabled by default to reduce log noise. Set
 * this variable to TRUE in order to enable the additional logging.
 */
# $conf['cron_logging_enabled'] = TRUE;